REBARMAT® GFRP Rebars offer various advantages, including unique properties and economic benefits such as:
UP TO 50% ECONOMY
By replacing common metal rebar with modern composite rebar, you can secure savings of up to 50% from your overall costs. Significantly reduced maintenance and service life costs. Up to fourfold savings in transport costs due to 75 % lower deadweight. Cost reduction of structures through minimal requirements for concrete covering
STRENGTH AND
RELIABILITY
The composite rebar has a tensile strength three to four times greater than conventional reinforcement bars made of unalloyed steel and stainless steel. Tested according to ISO 10406-1, due to this quality, it is possible to use a smaller diameter in certain application.
SUSTAINABLE & DURABLE
The composite rebar is highly resistant to chemical treatments and corrosion, so its service life is at least 100 years, unlike metal and other analogs. Significantly reduced maintenance and service life costs compared to conventional steel rebars
EASY SHIPPING
Rebar’s small diameter and light weight allows it to be transported with exceptional ease, be it in a trunk of a car for a residential house or in a HGV that can deliver up to 150km of our rebar.
NON CONDUCTIVE
Composite rebar doesn’t cause radio interference, magnetize, or conduct electricity. It also has low heat conductivity, which reduces thermal bridges, and is easy to machine without damaging tools or machinery.
EASY INSTALLATION
Rebar’s light weight and easy transportation properties allows to significantly speed up installation process to reinforce your building projects. Minimised deadweight of concrete structures. Permits filigree structures
Our products
High performance replacement for reinforcement bars made of: Inox stainless steel, Epoxy coated steel, Galvanized steel and Black steel / reinforcement steel
FRP REBARMAT® PRO rebars and Steel rebars
The Smart Choice for Strong and Sustainable Structures
Parameters
FRP REBARMAT® PRO rebars
Other fiberglass rebar manufacturers
Steel rebar B500
Designated diameter
8 mm
8 mm
8 mm
Nominal diameter
(Core diameter)
(Core diameter)
8 mm
6,5 – 8 mm
8 mm
Weight
0,112 kg/m
0,086 – 0,110 kg/m
0,420 kg/m
Density
2,2 g/cm³
1,7 – 1,9 g/cm³
7,85 g/cm³
Rib dimension
8-10 mm
12-20 mm
6 mm
Tensile Strength, MPa
≥ 1100
800 – 1100
500
Tensile Young’s modulus
(N/mm2)
(N/mm2)
≥50,000
45,000 – 50,000
200,000
Breaking elongation %
2 – 2,2
2,2 – 2,4
25
Magnetism
No
No
Yes
Service life
Design service life of 100 years
80 years
30-40 years
Standards and norms
EUROCODE 2
ISO 10406-1
ASTM D7205
GOST 31938-2022
EAD 260023-00-0301
ISO 10406-1
ASTM D7205
GOST 31938-2022
EAD 260023-00-0301
D1
Nominal diameter
(Core diameter)
(Core diameter)
D2
Actual diameter
(Overall diameter)
(Overall diameter)
L1
Rib dimension
about us
REBARMAT has been created by a team of professionals with years of experience in construction industry.
After researching the market, we realized that the conventional version of metal rebar, that is used more often thus far, actually lacks many advantages. This led us to begin our extensive search and analysis of alternative options resulting in establishing a production plant which uses effective technology for the manufacturing of composite reinforcement, that specifically boasts these much needed advantages comparing to steel.
Based on 2000 square meters we have created our own production and warehouse premises with highly modern equipment. We are located in Latvia and work according to high European standards, all our products are made according to ISO 10406-1:2015. Our advantage is independence from external circumstances, because we use only European materials from trusted partners, plus our factory is powered by solar electricity. At the moment we can produce around 6 500 000 meters of composite rebar per year.
Contacts
To contact us, fill out the form or call! We will be happy to help you.
Production:
“Vecozoli K-4”, Zaķumuiža,
Ropažu novads, LV-2133